|
laplander nu list (55)
3 mm plate welded round the box section
Date: 01/29/09
Views: 113
|
laplander nu list (54)
after the mud and stones were cleaned out of the box section i fill chassis with expanding builders foam to keep water out in future
Date: 01/29/09
Views: 112
|
laplander nu list (60)
box section primed prior to waxing
Date: 01/29/09
Views: 116
|
|
laplander nu list (56)
primed and two coats of waxoil
Date: 02/01/09
Views: 131
|
laplander nu list (49)
petrol tank clean inside and out
Date: 01/20/09
Views: 137
|
laplander nu list (48)
three coats of primer and paint
Date: 01/19/09
Views: 112
|
|
laplander nu list (57)
tank back in place with waxoil coating and new pipes and clips , bolted with stainless nuts and bolts
Date: 02/01/09
Views: 124
|
laplander nu list (90)
removable discs made to blank holes in chassis
Date: 04/07/09
Views: 127
|
laplander nu list (91)
discs in place
Date: 04/07/09
Views: 176
|
|
laplander nu list (89)
hatch and all that goes with it like rubber seals had to be restored for water proofing
Date: 06/02/08
Views: 119
|
laplander nu list (84)
removable blanking platyes on chassis ends
Date: 04/08/09
Views: 115
|
laplander nu list (36)
footwells where a bit thin near the seams on both sides but not bad enough to cut out
Date: 09/05/08
Views: 114
|
|
530 (800x600)
making strengthening plates brings floor thickness to 5 mm
Date: 09/24/08
Views: 152
|
laplander nu list (40)
rust proofing before fixing
Date: 9/24/2008
Views: 141
|
laplander nu list (39)
bolts and riveted in place, same was done other side then undersealed twice
Date: 9/24/2008
Views: 122
|
|
laplander nu list (21)
sanded down till all loose paint and rust was gone, tacked clothed with xyelene
Date: 8/12/2008
Views: 121
|
laplander nu list (22)
photo # 2
Date: 8/12/2008
Views: 125
|
laplander nu list (23)
all the roof joints and seams were water proofed and primed
Date: 8/13/2008
Views: 116
|
|
laplander nu list (25)
plenty of filling and primer
Date: 8/13/2008
Views: 149
|
laplander nu list (24)
photo # 2
Date: 8/13/2008
Views: 123
|
laplander nu list (28)
two coats off nato green paint
Date: 8/16/2008
Views: 118
|
|
laplander nu list (27)
very similar colour to the laplander green
Date: 8/16/2008
Views: 142
|
laplander nu list (26)
starting to put splinter camouflage on
Date: 8/19/2008
Views: 126
|
laplander nu list (35)
photo # 2
Date: 9/6/2008
Views: 125
|
|
laplander nu list (8)
photo # 3
Date: 8/19/2008
Views: 124
|
laplander nu list (10)
the light Swedish earth brown was a trial to match
Date: 8/19/2008
Views: 122
|
laplander nu list (9)
roof pattern of m 90 camo
Date: 8/19/2008
Views: 170
|
Recent comments
valp restoration/headlamp upgrade.
show full show summaryi fit 2 x h/4 quartz halogen bulbs which were 65 watts, which were better than the valps original glow worm bulbs but then i acquired some 130/90 eye ball burners. i guess the cables on the valp may have taken the extra load but the light switches...
i fit 2 x h/4 quartz halogen bulbs which were 65 watts, which were better than the valps original glow worm bulbs but then i acquired some 130/90 eye ball burners. i guess the cables on the valp may have taken the extra load but the light switches certainly would have burnt out in a very short time. so now i am satisfied with the project which took about two days of rolling about under the valp and trying different routes for the cables.
Posted by Dave Boston-dunn on 1/24/2010 1:05:17 PM