|
laplander nu list (64)
photo # 4
Date: 2/8/2009
Views: 102
|
laplander nu list (65)
photo # 5
Date: 2/8/2009
Views: 100
|
laplander nu list (7)
axles taken out
Date: 01/12/09
Views: 104
|
|
laplander nu list (47)
cleaned and seals checked
Date: 01/21/09
Views: 106
|
laplander nu list (46)
primed twice and ready for green paint when reinstalled
Date: 01/21/09
Views: 102
|
laplander nu list (58)
rear axle nearly in
|
|
laplander nu list (59)
installed now
Date: 02/02/09
Views: 105
|
laplander nu list (67)
new brakes and cylinders and brake lines
Date: 02/06/09
Views: 100
|
laplander nu list (66)
before
Date: 02/08/09
Views: 112
|
|
laplander nu list (70)
after
Date: 02/18/09
Views: 108
|
laplander nu list (79)
front axle rebuild with new ball joints , brakes and lines
Date: 02/20/09
Views: 122
|
laplander nu list (41)
my patent support system
Date: 01/12/09
Views: 100
|
|
laplander nu list (80)
as it should be
|
laplander nu list (78)
steering box leaking
Date: 02/25/09
Views: 103
|
laplander nu list (5)
steering box with new seal
Date: 08/28/09
Views: 110
|
|
laplander nu list (71)
5 mm steel plate mounted to protect tthe drag links and track rods
Date: 20.02.2009
Views: 99
|
laplander nu list (92)
replacement headlights with 80 watt halogen bulbs and reflektors, change for uk roads
Date: 10.12.2008
Views: 100
|
laplander nu list (34)
all the doors were taken off and cleaned and the seals were remounted and locks made operational
|
|
laplander nu list (72)
a little addition was an alloy tube that bolts to the extension exhaust brackets, this holds the antennae for the radio / flags.
Date: 02/23/09
Views: 105
|
124 (800x600)
photo # 1 also shows that the timber was replaced with the hardwood ASH and fixed with stainless bolts
Date: 02/23/09
Views: 107
|
121 (800x600)
tube open
Date: 02/23/09
Views: 104
|
|
122 (800x600)
tube locked and weather sealed
Date: 02/23/09
Views: 106
|
laplander nu list (16)
i made a fold up step for the rear door so it is easier to get in.
Date: 09/27/08
Views: 105
|
laplander nu list (96)
inside all the lining was taken out
Date: 05/05/08
Views: 104
|
|
laplander nu list (15)
replaced with foam sponge for insulation
Date: 06/13/08
Views: 105
|
laplander nu list (18)
a new timber plywood floor
Date: 06/23/08
Views: 123
|
laplander nu list (19)
sides were insulated
|
Recent comments
valp restoration/headlamp upgrade.
show full show summaryi fit 2 x h/4 quartz halogen bulbs which were 65 watts, which were better than the valps original glow worm bulbs but then i acquired some 130/90 eye ball burners. i guess the cables on the valp may have taken the extra load but the light switches...
i fit 2 x h/4 quartz halogen bulbs which were 65 watts, which were better than the valps original glow worm bulbs but then i acquired some 130/90 eye ball burners. i guess the cables on the valp may have taken the extra load but the light switches certainly would have burnt out in a very short time. so now i am satisfied with the project which took about two days of rolling about under the valp and trying different routes for the cables.
Posted by Dave Boston-dunn on 01/24/10 13:05:17